Why is the time wrong in my Station Monitor?

Follow

*This article is applicable to both operators of VR Arcades and operators of VR labs & maker spaces at educational institutions.*

If you notice that the time is incorrect when using the station monitor, then you most likely have not setup your timezone correctly when setting up your locations. To fix this, please follow these steps.

  1. First go to "Admin" and click on "Locations".
    Location_Operator_Admin_Locations.png
  2. Click on the location you need to change the timezone for.
  3. Make sure the timezone is set correctly within the Basic Info section of the location settings.
    Location_Operator_Time_Zone.png
  4. Don't forget to click "Save" at the bottom of the page.

The time should now appear correctly on the Station Monitor!

0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.